烤漆房廢氣怎么處理，噴漆房催化燃燒廢氣處理設備介紹伸縮式噴漆房是為解決較大型工件移動運送困難而研制的實用型產品,烤漆區可根據產量大小，任意調整，充分利用生產場地和操作空間。

　　How to treat the exhaust gas in the paint baking room? Introduction to catalytic combustion exhaust gas treatment equipment in the paint baking room. The telescopic paint baking room is a practical product developed to solve the difficulty of moving and transporting larger workpieces. The paint baking area can be adjusted according to the production volume, making full use of the production site and operating space.

　　涂裝世界伸縮式噴漆房注意事項1、在進行噴涂前先檢查噴涂的氣壓是否正常，同時確認系統清潔；

　　Precautions for the retractable paint booth in the painting world: 1. Before spraying, check whether the air pressure is normal and confirm that the system is clean;

　　2、檢查空氣壓縮機和油 水微塵分離器，使噴漆軟管保持潔凈；3、噴槍、噴漆軟管和調漆罐要存放在干凈的地方；

　　2. Check the air compressor and oil-water dust separator to keep the paint hose clean; 3. Spray guns, spray hoses, and paint mixing tanks should be stored in clean places;

　　4、除了用吹風槍和粘塵布除塵外，其它所有噴涂前的工序都應該在烤漆房外完成；

　　4. Except for using a hair dryer and adhesive cloth to remove dust, all other pre spraying processes should be completed outside the paint booth;

　　5、在烤漆房只能進行噴涂和烘烤工序，而且烤漆房房門只可在車輛進出時開啟，開啟房門時開動噴涂時的空氣循環系統以產生正壓，確保房外的灰塵不能進入房內。

　　5. In the paint baking room, only spraying and baking processes can be carried out, and the door of the paint baking room can only be opened when vehicles enter and exit. When opening the door, the air circulation system during spraying is activated to generate positive pressure, ensuring that dust outside the room cannot enter the room.

　　6、穿著指定的噴漆服和佩戴防護用具才能進入烤漆房進行操作；

　　6. Wear designated spray paint clothing and protective equipment before entering the paint booth for operations;

　　7、在進行烘烤作業時，將烤漆房內的易燃物品拿出房外

　　7. When performing baking operations, remove flammable materials from the paint booth outside the room

　　8、非必要人員，不得進入烤漆房。

　　8. Non essential personnel are not allowed to enter the paint booth.

　　噴漆房的維護保養：

　　Maintenance and upkeep of the paint booth:

　　1、每天清潔房內墻壁、玻璃及地臺底座，以免灰塵和漆塵積聚；

　　1. Clean the walls, glass, and floor bases in the room every day to prevent the accumulation of dust and paint dust;

　　2、每星期清潔進風隔塵網，檢查排氣隔塵網是否有積塞，如房內氣壓無故增加時，更換排氣隔塵網；

　　2. Clean the intake dust screen every week and check if there are any blockages in the exhaust dust screen. If the air pressure in the room increases inexplicably, replace the exhaust dust screen;

　　3、每工作150h應更換地臺隔塵纖維棉；

　　3. The platform dust isolation fiber cotton should be replaced every 150 hours of work;

　　4、每工作30oh應更換進風隔塵網；

　　4. The air inlet dust screen should be replaced every 30 hours of work;

　　5、每月清潔地臺水盤，并清洗燃燒器上的柴油過濾裝置；

　　5. Clean the floor water tray monthly and clean the diesel filtration device on the burner;

　　6、每個季度應檢查進風和排風電動機的傳動皮帶是否；

　　6. Check the drive belts of the intake and exhaust motors every quarter;

　　7、每半年應清潔整個烤漆房及地臺網，檢查循環風活門、進風及排風機軸承，檢查燃燒器的排煙通道，清潔油箱內的沉積物，清洗烤漆房水性保護膜并重新噴涂；

　　7. Every six months, the entire paint baking room and floor net should be cleaned, the circulating air valve, inlet and exhaust fan bearings should be checked, the exhaust passage of the burner should be checked, the sediment in the oil tank should be cleaned, the water-based protective film in the paint baking room should be cleaned and re sprayed;

　　8、每年應清潔整個轉換器，包括燃燒室及排煙通道，每年或每工作1200h應更換烤漆房頂棉。

　　8. The entire converter, including the combustion chamber and exhaust duct, should be cleaned annually, and the painted roof cotton should be replaced every year or every 1200 hours of operation.

　　本文由  伸縮式噴漆房  友情奉獻.更多有關的知識請點擊  http://www.9qmv.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the retractable paint booth For more related knowledge, please click http://www.9qmv.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

上一篇：工業涂裝流水線：涂裝生產流水線的工藝流程
下一篇：VOCs揮發氣回收設備:治理不是“走過場”，而是“真見效”