那么涂裝電泳設備這個重生產品，它與其它的涂裝辦法比較有什么樣的長處呢？就來說說它的好壞的地方吧：

　　So what are the advantages of coating electrophoresis equipment, a reborn product, compared to other coating methods? Let's talk about its pros and cons:

　　一、電泳涂裝比其它涂裝辦法更環保更安全：電泳涂裝是選用水溶性涂料，以水為介質，因而能夠節約許多的有機溶劑，大大降低了對大氣的污染和環境危害，安全衛生，也避免了火災的危險；

　　1、 Electrophoretic coating is more environmentally friendly and safe than other coating methods: Electrophoretic coating uses water-soluble coatings and water as the medium, which can save a lot of organic solvents, greatly reducing air pollution and environmental hazards, ensuring safety and hygiene, and avoiding the risk of fire;

　　二、電泳涂裝比其它涂裝辦法功率要高，因為能夠回收利用，所以漆的損耗小，涂料的利用率可達95%，甚至更高。

　　2、 Electrophoretic coating has higher power than other coating methods because it can be recycled, resulting in less paint loss and a coating utilization rate of up to 95% or even higher.

　　三、涂裝電泳設備可完成自動化連續生產出貨，大大的提高了出產與勞動功率。

　　3、 The coating electrophoresis equipment can achieve automated continuous production and shipment, greatly improving production and labor power.

　　四、電泳涂裝比其它涂裝法的涂裝漆膜要好：電泳涂裝的涂膜均勻，附著能力強，涂裝質量好，工件各個部位如內層、凹陷、焊縫等處都能取得均勻、滑潤的漆膜，能夠處理其他涂裝辦法對凌亂形狀工件的涂裝難題。

　　4、 Electrophoretic coating is better than other coating methods in terms of coating film: the coating film of electrophoretic coating is uniform, has strong adhesion ability, and has good coating quality. Various parts of the workpiece such as inner layers, depressions, welds, etc. can obtain a uniform and smooth coating film, which can solve the problem of coating messy shaped workpieces with other coating methods.

　　五、電泳涂裝比其它涂裝法的前期出資要高：電泳涂裝的設備多，建廠費用高，耗電量也大，其烘干固化溫度也比其它的要高些，涂料、涂裝的管理雜亂，施工條件嚴峻，并且還需求進行廢水處理，增加了廢水處理的本錢。

　　5、 Electrophoretic coating requires higher initial investment compared to other coating methods: it has more equipment, higher construction costs, and consumes more electricity. Its drying and curing temperature is also higher than others. The management of coatings and coatings is chaotic, and the construction conditions are severe. In addition, wastewater treatment is also required, which increases the cost of wastewater treatment.

　　六、因為涂裝電泳設備只能選用水溶性涂料，在涂裝過程中不能隨意的改動色彩，而涂料貯存過久就會穩定性欠好，或者沉淀結塊，這也是涂裝電泳設備有待改進的缺陷。

　　6、 Because only water-soluble coatings can be used for coating electrophoresis equipment, the color cannot be changed arbitrarily during the coating process. However, if the coating is stored for too long, its stability will be poor or it will precipitate and clump, which is also a defect that needs to be improved for coating electrophoresis equipment.

　　以上的內容均來自：機器人涂裝線更多的精彩內容請點擊我們的網站查看：http://www.9qmv.com我們會有更多精彩的內容為您呈現，感謝您的關注！

　　The above content is all from: Robot Coating Line. For more exciting content, please click on our website to view: http://www.9qmv.com We will have more exciting content to present to you. Thank you for your attention!

上一篇：環保伸縮噴漆房在設計上要注意什么？
下一篇：工業涂裝流水線：涂裝生產流水線的工藝流程